Carrier 52CE Manual do Proprietário

52CSERIES1•800•894•6449For Service/Technical AssistanceOWNER’S MANUALPACKAGED TERMINAL AIR CONDITIONERSAND HEAT PUMPS7,000-15,000 BtuhCONTENTSPageGENE

52CSERIES10CARE AND MAINTENANCEIn order to maintain proper performance of your pack-aged terminal air conditioner or heat pump, it is very important t

11EXTERNAL PARTS EXTERNAL PARTS include the polymer sleeve and grilles. The sleeve manufacturer recommends cleaning the surface, including the gril

52CSERIES12PREVENTATIVEMAINTENANCEPreventative maintenance is essential to proper unit operation, efficiency and longevity. To assure equip-ment opera

13TROUBLESHOOTINGNOTES:1. If circuit breaker is tripped or fuse is blown more than once, contact a qualified electrician.2. If unit is installed where

52CSERIES14ACCESSORIES*Extended metal wall sleeve also available in 26 in. and 20 in. deep.†Custom colors are also available.ACCESSORY FORM NUMBER PAR

15

52CSERIESCopyright 2001 Carrier CorporationManufacturer reserves the right to discontinue, or change at any time, specifications or designs without no

52CSERIES2GENERALThank you for choosing Carrier! You can feel confident in your selection because the same pride in craftsman-ship and engineering kno

3To install the front panel follow the procedure outlined below:1. Firmly grasp bottom of front panel on both sides.2. Hold front panel at a 45 degree

52CSERIES4ELECTRICAL DATABe sure that your outlet matches the appropriate blade configuration of the supplied plug and that it is within reach of the

5INSTALLATIONCHASSIS INSTALLATIONUnits are shipped without a sleeve. In applications where unit is a replacement, it is recommended that a Carrier sle

52CSERIES6 INSTALL CHASSIS IN SLEEVE (See Figures 6 to 9)1. Inspect foam gaskets (top, bottom, both sides) on chassis. Replace foam gaskets if torn

7WALL THERMOSTAT INSTALLATIONThe following instructions apply to RC and RP units only.NOTE: Carrier thermostats are recommended. See Accessories secti

52CSERIES8OPERATIONCOMFORT CONTROLS ADJUST AIRFLOW DIRECTION — The discharge air grille is mounted on the front panel so that the air discharges for

9OPERATING CONTROLSThe following controls are located on the front of the chassis. To obtain access to operating controls, remove the unit front panel