Carrier 558D Manual do Utilizador descarregar pdf (Página 7)

851-558 Rev. D 7 Dorner Mfg. Corp.

Fixed and Adjustable Height Stands

Installation

8. Install u–nuts (Figure 9, item 1) into outer t–slots of

stand legs (Figure 9, item 2).

Figure 9

9. Align conveyor mounting bracket (Figure 10, item 1)

with u–nuts. Attach flange socket screws (Figure

10, item 2) through bracket and into u–nuts. Tighten

flange socket screws (Figure 10, item 2) to 150 in–lb

(17 N–m).

Figure 10

10. For leveling and height adjustment see page 10.

Stands Shipped Fully Assembled

Required Tools

• 6 mm Hex Key Wrench

Typical Components (Figure 11):

Figure 11

1. Loosen (2) hex nuts (Figure 12, item 1) located on boot

assembly (Figure 12, item 2).

Figure 12

WARNING

Failure to secure screws (Figure 10, item 2)

may cause conveyor sections to drop down

causing severe injury.

TIGHTEN SCREWS (Figure 10, item 2) AFTER

ADJUSTMENT.

1 Stand Assembly

2 Boot Assembly (2x)

1 2 3 4 5 6 7 8 9 10 11 12 ... 15 16

Sem comentários

Carrier 558D Manual do Utilizador Página 7