Carrier 38TXA Guide Guia do Utilizador descarregar pdf (Página 113)

Chapter 3 113

Pass/Fail Limit (Specification) Descriptions

5. RXA Expandor Tracking Error >0dB (dB)

This sets the pass/fail limits used when the expandor’s output level is

measured at input levels above the 0 dB reference level. The output

voltage tolerance should be within the pass/fail limits. Upper and lower

limits must be entered in dB.

Pass/fail limits are determined by using any applicable standard, such

as:

• EIA/TIA Standard: Expandor

Example

If you desire the output voltage tolerance above the 0 dB reference level

to be

±1 dB, enter −1 as the Lower Limit and 1 as the Upper Limit.

1 2 ... 108 109 110 111 112 113 114 115 116 117 118 ... 213 214

Sem comentários

Carrier 38TXA Guide Guia do Utilizador Página 113