Carrier operating and maintanance Instruções de Operação descarregar pdf (Página 11)

Figure 17. Fixing the connection strip

This method applies for sections that end with corner

posts.

Figure 15.

Fixing the sealing tape to the joint mulli-

ons

- Use the pre-mounted corners for the final positioning

of the sections and secure the corners with a bolt.

The sections must be fully aligned.

Figure 16.

Corner connection

- Remove the first two corners and mount the alumini-

um connection strip to the base. Remove the next two

corners and mount the connection strip against the

side wall. Repeat this for the other AHU corners.

Figure 18.

Corner posts with coupling profile

- Ensure that the sealing tape supplied is fixed to

one of the two sections, before moving the sections

against each other .

Figure 19.

Fixing sealing tape to the corner posts

- Link the sections by connecting the pre-mounted

corner posts with bolts and nuts (M6).

Figure 20.

Connecting the corner posts

- If there are more than two sections, repeat the pro-

cedure above. For an outdoor installation all external

joints should be sealed.

Method 2

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 40 41

Sem comentários

Carrier operating and maintanance Instruções de Operação Página 11