
Rev. __________
Date _________
2.17
INSTALLING THE TIE-DOWN STRAP
1. With the vehicle lifted just barely
off the ground, attach the strap
to the wheel grid. Be sure the
hook on the ratchet is securely
seated in the “L” arm.
2. Set the ratchet spool in “free
spool” position and pull the
webbed strap out and form a
loop which will wrap around the
tire. Be sure the loop is over a
minimum of 1/3 of the tire.
3. Take up the slack in the strap by
ratcheting the takeup spool arm.
Continue until the tires show
some compression.
4. Raise the wheel grid to the tow-
ing position. RE-TIGHTEN THE
RATCHET PERIODICALLY AS
TIRE SETTLES IN GRID FROM
TOWING.
Comentários a estes Manuais